 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROWAVE CORPORATION v01.0604 HMC369LP3 Features Output Power: +4 dBm Sub-Harmonic Suppression: 30 dBc SSB Phase Noise: -142 dBc/Hz Single Supply: 5V@ 46 mA 9 mm2 Leadless SMT Package SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Typical Applications Active Multiplier for X Band Applications: * OC-192 Clock Recovery * Microwave Radio & VSAT * Military Radios, Radar & ECM * Test Instrumentation 11 FREQ. MULTIPLIERS - SMT Functional Diagram General Description The HMC369LP3 is an active miniature x2 frequency multiplier utilizing InGaP GaAs HBT technology in a 3 mm x 3 mm leadless QFN surface mount package. Power output is +4 dBm typical from a single +5.0V supply and varies little vs. input power, temperature and supply voltage. Suppression of undesired fundamental and sub-harmonics is 30 dBc typical with respect to output signal level. The low additive SSB phase noise of -142 dBc/Hz at 100 kHz offset helps the user maintain good system noise performance. The HMC369LP3 is ideal for use in LO multiplier chains allowing reduced parts count versus traditional approaches. The HMC369LP3 is also useful for OC-192 clock recovery. The application of 10 GBPS data to the input generates a -7 dBm clock tone at the output with spurious signals suppressed by 25 dB. Electrical Specifications, TA = +25 C, Vcc= 5.0V Parameter Frequency Range, Input Frequency Range, Output Input Power Range Output Power Sub-Harmonic Suppression Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset) Supply Current (Icc) Pin= 0 dBm -5 -1 3 30 17 5.5 -142 46 Min. Typ. 4.95 - 5.3 9.9 - 10.6 +5 -5 0 4 30 16 6 -142 46 Max. Min. Typ. 5.3 - 6.35 10.6 - 12.7 +5 Max. Units GHz GHz dBm dBm dBc dB dB dBc/Hz mA 11 - 40 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0604 HMC369LP3 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Output Power vs. GaAs MMIC SUB-HARMONICALLY Output Power vs. Drive Level PUMPED MIXER 17 - 25 Temperature @ 0 dBm Drive Level 8 7 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 6 5 4 3 2 1 0 -1 -2 9.5 10 10.5 11 +25 C +85 C -40 C GHz 8 7 6 5 4 3 2 1 0 -1 12 12.5 13 -2 9.5 10 10.5 11 -10 dBm -5 dBm 0 dBm +5 dBm 11 12.5 13 11.5 11.5 12 OUTPUT FREQUENCY (GHz) OUTPUT FREQUENCY (GHz) Output Power vs. Supply Voltage @ 0 dBm Drive Level 8 7 OUTPUT POWER (dBm) 6 5 4 3 2 1 0 -1 -2 9.5 10 10.5 11 Vcc=4.5V Vcc=5.0V Vcc=5.5V Input Return Loss vs. Temperature 0 INPUT RETURN LOSS (dB) -5 -10 -15 -20 -25 -30 +25 C +85 C -40 C 11.5 12 12.5 13 3 3.5 4 OUTPUT FREQUENCY (GHz) 4.5 5 5.5 FREQUENCY (GHz) 6 6.5 7 Output Return Loss vs. Temperature 0 OUTPUT RETURN LOSS (dB) -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 9.5 10 10.5 11 11.5 12 12.5 13 +25 C +85 C -40 C FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 11 - 41 FREQ. MULTIPLIERS - SMT MICROWAVE CORPORATION v01.0604 HMC369LP3 SSB Phase Noise Performance, Fout= 10.66 GHz, Input Power= 0 dBm 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 2 10 SSB PHASE NOISE (dBc/Hz) SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Output Spectrum 10 0 OUTPUT POWER (dBm) -10 -20 -30 -40 -50 -60 0 2 4 6 8 10 12 14 16 18 20 22 24 26 FREQUENCY (GHz) 11 FREQ. MULTIPLIERS - SMT 10 3 10 4 10 5 10 6 10 7 OFFSET FREQUENCY (Hz) 11 - 42 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0604 HMC369LP3 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Absolute Maximum Ratings RF Input (Vcc= +5V) Vcc Channel Temperature Continuous Pdiss (T=85 C) (derate 7 mW/C above 85 C) Thermal Resistance (Rth) (junction to ground paddle) Storage Temperature Operating Temperature +20 dBm +6.0V 150 C 450 mW Typical Supply Current vs. Vcc Vcc (V) 4.5 5.0 5.5 Icc (mA) 45 46 47 145 C/W -65 to +150 C -40 to +85 C Note: Multiplier will operate over full voltage range shown above. 11 FREQ. MULTIPLIERS - SMT Pin Locations & Outline Drawing NOTES: 1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY 3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 11 - 43 MICROWAVE CORPORATION v01.0604 HMC369LP3 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Pin Description Pin Number 1, 2, 5-8, 1113, 15, 16 Function N/C Description No Connection. These pins may be connected to RF ground if desired. Performance will not be affected. Interface Schematic 11 FREQ. MULTIPLIERS - SMT 3 RF IN RF input needs to be DC blocked only if there is an external DC voltage applied to RF IN. 4, 9 GND All ground leads and ground paddle must be soldered to PCB RF/DC ground. 10 RF OUT Multiplied Output. AC coupled. No external DC blocks necessary. 14 Vcc Supply voltage 5V 0.5V. 11 - 44 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com MICROWAVE CORPORATION v01.0604 HMC369LP3 SMT GaAs HBT MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 9.9 - 12.7 GHz OUTPUT Evaluation PCB 11 FREQ. MULTIPLIERS - SMT 11 - 45 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. The evaluation circuit board shown is available from Hittite upon request. List of Materials Item J1, J2 J3, J4 C1 U1 PCB* Description PC Mount SMA Connector DC Pin 0.01 F Capacitor, 0603 Pkg. HMC369LP3, x2 Active Multiplier 107710 Eval Board * Circuit Board Material: Rogers 4350 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com |
Price & Availability of HMC369LP3
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |